IFW-Dresden Superconducting Maglev Train Models

The future of Urban Mass Transportation... is in super conductivity and magnetic levitation...

Alternative oil 7 Glass breakage as cleaning crude with coconut

Do not do this at home. Don't replicate or try this please.
Do not play with fire. This is a open location with fire protection on hand. You may get burned or
harmful gasses given off and or skin damage may result.
This testing is done to show alternative fuels flash point = break down level.
The slower to burn up the better viscosity in the engine. Plant oils clean up
carbon deposits and take allot longer to break down.
the higher the flash point the harder it is for them to break down in any engine.
Anything using crude can break down very quickly with the crude oil.
Plant oils last allot longer as they have a higher flash point depicted in each one
of there MSDS sheets reveal. Google the plant oil and msds flash point and or smoke point.
I like palm and or coconut and higher forms of clean plant life. Cold temperatures
can clog up engines. So look for the melting point and you can mix them then.
Testing should be done on very small engines you do not need.

Free Energy Magnetic Motor

What the big oil don't want you to know...

And I got this from a traveller... with a dog.

I just forgot to ask what's the name of his dog.

At any rate, please enrich your minds.

My Old Buddy Where are you man

Steve where are you ? or Actually the Decent people like this guy that worked on this project before. Thank you for keeping these videos alive so I could review them years later :) there very informative if you know what your looking for.

ELECTRIC VEHICLE SURGE TECHNOLOGY NO BATTERIES NO GAS

FREE ENERGY MACHINE electric vehicle with no batteries to run just a 12 volt battery to start and run the radio and fan blower
TOTAL ENERGY INDEPENDANCE FOR TOMORROW'S WORLD

COVERT YOUR CAR TO SURGE TECHNOLOGY NO NEED FOR CHARGING STATIONS CAR RUNS AND PRODUCES ITS OWN POWER IN A LOOP NO NEED FOR LITHIUM BATTERIES

DO THE PLANET A FAVOR BUY HYBRID? ELECTRIC FUEL CELL OR BIO STOP WARS FOR OIL. ANOTHER IS PREPARING UP IN THE MELTING ARTIC. THE DESTRUCTION OF THE PLANET IS NEAR

THE CYNERGY DRIVE BY TOYOTA IS TO KEEP THE PETROL DUDS HAPPY still need to by GAS TO RECHARGE BATTERIES WHAT A LOAD OF BS get rid of the gas machine and fit one of these surge technolgy units into your hybrid and run for free and forever.
more info on
http://www.kbmorgan.com/marsmission/m...

IF YOU WANT A PLUG IN HYBRID HACK THE CPU OF THE TOYOTA PRIUS AND FIT A PLUG ON THE VEHICLE DO WAT JAPANESE DO 1500 MILES WITH ONE TANK
HACK THE TOYOTA PRIUS MAKE IT A PLUG IN+ 100 mpg + GOTO
http://www.calcars.org/ stop buying GASOLINE TODAY RUN AROUND ON ELECTRONS
conversion fo the prius 10 K
http://www.ecogeek.org/content/view/1...
or even www.Gas-2-Electric.com GREAT INFO !!!!!

New Over Unity Motor...

Over unity motor...

An Awesome DIY Experiment

Just as the title says...

Magnetic Shielding - James Roney Stator Revealed!

The long awaited video that reveals the secret behind the One Way Magnetic Shielding. However, shielding is just the half of it. The other half is the exact position of the stator verses the angel of approach of the oncoming magnets. At all times only like poles are used as the primary pole. This means that the magnets approaching the stator will be two like poles that must be able to easily pass each other in close proximity. This approach is what I call the back door to my stator, where one of the like poles have been heavily shielded. However if you over shield the like pole, than the approaching magnet will want to stop or slow down when the approaching magnet sees all that metal shielding on the stator. To neutralize this challenge, we must allow some of the "like pole" to bleed through the shielding. When the right amount leaks through, it neutralizes/balances both the drag effect of the shielding itself as well as the counter drag caused by two like poles. When we get this equal between the two hurdles, the approaching magnets with two like poles pass right on by the back edge of the stator with the greatest of ease!!

Now that the like poles have passed the backdoor of the stator easily, the back edge of the passing magnets passes the edge where the shielding stops! ... only to be suddenly thrusts forward which in turn thrusts the next magnet in line behind it into the awaiting shielded stator, only to repeat this all over again and again.

The torque of this is enormous on such a small scale. On a large scale there would be plenty to power a car or power up a home.

When you take this 2D lay out and turn it into a 3D layout, you suddenly get a tremendous amount of thrust. The kind of torque required to handle heavy loads and still keep working with the greatest of ease. Best of all, there is only one moving part, and it's 99% friction free.

Here is the link to my original video that started all the commotion. As you can see, that despite claims that I was tricking people, you can now see that it's not a trick, rather... it's piratical physics at work.

Enjoy!

http://www.youtube.com/watch?v=agReLN...

A few notes:

(1) Please copy and repost this video to as many places as you can on the web before this video or this account is suspended for a third time. I only ask that you give me credit where credit is due. (The James Roney Stator) is how this stator should be referred to. Thanks in advance.

(2) Like I said in the video, the open front door, closed back door design, along with the triple shielding on the working side (which has the least flux) is what makes the Roney Stator different. Because it's long and thin, unlike typical bucket magnets which do not work in this case, this allows for a long 3" pass over the stator before the passing magnet suddenly gets kicked in the ass from the like/opposing fields. When this happens the next magnet inline gets pulled across the shielded magnet called the stator, and as soon as the passing magnet pasing the edge of the front door, that magnet in turn suddenly gets thrusted/kicked forward. This process simply repeats over and over again until the the first magnet inline comes around again to complete one full revolution, only to once again be thrusted forward. Now you have your fuelless magnetic motor.

It goes without saying that just like the answer to gravity itself, that ... "the answer to gravity will be so simplistic, that it will account for why it has been overlook for so long. Albert Einstein

That the answer to a magnetic fuel-less motor that is also (friction free) is no less, simplistic. Simply said, the answer has been under our noses all along.

Do to security reasons, I will not contact anyone via personal email addresses. I ask of you to pray for me and ask God to provide me with all the science supplies I need.

God bless.

Here is the URL I told you about. You will have to complete the URL address yourself because I do not want YouTube to have any reasons to suspend my account. To copy my videos, go to: (dvdvideosoft) by simply adding the dot and com to the end of their name: dvdvideosoft

You have my permission to freely copy and repost my videos in the name of science. Be sure to include the following in your tags and phrases so other, "would be researchers" will easily find my videos. You are welcome to copy the video description as well. Thanks in advance!

"One Way Magnetic Shielding"
"James Roney Stator"
"Fuel-less Magnetic Motor"
"Rare Earth Magnets"
"Neodymium"
"Stator"
"Magnetic Motor"

Magnetic Shielding Proof

The shielding material is called, "flashing material" which is commonly sold in hardware stores in the US. I have no idea of its true molecular makeup.

This simple demo (originally posted January 21, 2008) shows you shows you just how effective one way shielding works towards net gain. Here you see two specially shielded magnets, where one is closely moved next to the other rare Earth magnet. Upon the approach of one magnet next to the other, the shielded magnet on the table is totally unaffected by the other shielded magnet during the approach.

However once the magnet being pushed next to the other magnet reaches the end of the magnetic shielding, (the unshielded portion) the shielded magnet on the table suddenly thrusts forward.

It's this sudden thrust I propose to you as a viable formula to making a fuelless magnet engine/motor. (See blueprint link at bottom.)

This same "highly elementary" principle can be applied in the design of a fuelless magnetic motor of different designs.

110 Watts AC Magnet Generator - Awesome!

Dug this up from the internet, worth sharing... Just to jolt your imagination a bit and make you rethink about unlearning everything what your Dogmatic degree has programmed in your minds.

Ever wondered why Einstein dropped out of college?

... think about it...

DIY Free Energy Experriment with Magnets

This is a SUSPENDED YOUTUBE FOOTAGE: This video was made by YouTuber, Larry Lawrence, (YouTube Channel - larrylawrencejr) However, his channel, just like mine has been suspended by YouTube. Our videos examine possible methods to obtaining Free magnetic energy. To date, YouTube has taken down over 40 magnetic videos of mine and suspended three YouTube accounts, non of which had any copyright issues or violations. Go figure.

More than likely this account will get shut down as well.

I am reposting this video, because the only other copy of this video at the time of this posting, has the "remarks" turned off.

Please... rather than say this video is fake, help me to prove how this is fake as this is NOT my video.

I am not saying that Free Magnetic Energy or Engine is possible, rather our current understanding of physics does not allow for UFOs, yet they exist as I have seen them.

Obviously, man's current understanding of physics is not complete. That means that something has been overlooked, and thus, there might be something that has also been over looked, when it comes to magnetism.

Please have at it... as I will leave the remarks turned on.

If you have already tried this, and it did not work, please post the video of your failed attempt, so we can see if there might be something that may have been overlooked.

Thanks in advance.

Again, I did not make this video and I have not had the chance yet to replicate this experiment, be it fake or otherwise.

Here are some awesome vids to check out as well.

http://video.google.com/videoplay?doc...

http://www.youtube.com/watch?v=CHvuty...

Enjoy.

Cold Fusion Breakthrough

Cold Fusion will End the Fed and free us from the collapsing economy by creating a new energy economy not based on petrodollars but real wealth helped by a return to the Gold Standard and other Precious metal backed currencies. I said in my youtube 4 wks ago that China will End the Fed with Cold Fusion link below
http://www.youtube.com/watch?v=pjcTj6...
Keep up with latest announcements of the above with
http://achieveradio.com/cash-flow/
James Martinez predicted this so many times on his show as the solution to the Economic Crisis. James Martinez also helps people eliminate debt from credit cards and home mortgages. Dr Steven Greer another guest on above link talks about the New Energy Economy not being PetroDollars but based on Zero Point Energy Solutions from the Vacuum flux of space itself.
Check out Dr Steven Greers site dedicated to bringing about this New Energy Economy
http://www.theorionproject.org/en/ind...
Check out my playlist on UFO TECH
http://www.youtube.com/view_play_list...
and White Knight News in support of changing the NWO end game scenario
http://www.youtube.com/view_play_list...
and non military White Knight News playlist
http://www.youtube.com/view_play_list...
for great energy news
http://www.achieveradio.com/vortex-pr...

Sacred Geometry and it's relation to Energy

The universal law is much more vast than one can imagine... adherence to these laws can make science advance even further...

Notice how electromagnetism fluxxes take form and the shape of crystals follow the natural magnetic alignments of each and every molecular polarities...

The universe is indeed a wonderful world. And it is indeed sacred.

Amazing Architect!

Animation of LHC how it works

The Large Hadron Collider is the largest and most scientific instrument ever built and the highest energy particle accelerator in the world.
The accelerator is located 100 m underground and runs through both French and Swiss territory. ( 27km circumference)

Year 2008 September 10th, marks the culmination of 20 years of work by over 8000 scientists thousands of engineers, technicians and support staff from over 80 different countries.

some critics say that this could create a black hole and suck up the entire world..but many say that even if a black hole is created it will wannish within a millionth of a second..

Latest : they have successfully done the 1st testing on the 10th September 2008, sending 2 beams separately clockwise and anticlockwise, which had successfully gone all the way around the ring. but there had been some minor errors, which we dont have to worry about.

***due to a helium leak, the LHC wont be re-started till 2009.

Atlas Project - How it Works.

ATLAS (A Toroidal LHC Apparatus) is one of the six particle detector experiments currently being constructed at the Large Hadron Collider (LHC), a new particle accelerator at the European Organization for Nuclear Research (CERN) in Switzerland. When completed, ATLAS will be 46 metres long and 25 metres in diameter, and will weigh about 7,000 tonnes. The project involves roughly 2,000 scientists and engineers at 165 institutions in 35 countries.

The construction was scheduled to be completed in June 2007, however is now stated to be April or mid-2008

The experiment is designed to observe phenomena that involve highly massive particles which were not observable using earlier lower-energy accelerators and might shed light on new theories of particle physics beyond the Standard Model.

The Atlas Project

The biggest Particle Accelerator project in the world... They said it can make black holes...

This is a time lapse video of the ATLAS cavern during construction.

This shows the cavern in which the ATLAS experiment is being assembled since 2003. The LHC and ATLAS are due to turn on in September 2008.